Design of the Hydraulic Pump for the Pilot Lifting Test (PLT) in Deep-sea

Chi-Ho Yoon; Jongmyung Park; Byungsik Ahn

doi:10.32390/ksmer.2019.56.5.529

All Issue

2019 Vol.56, Issue 5 Preview Page Next Page

Research Paper

Design of the Hydraulic Pump for the Pilot Lifting Test (PLT) in Deep-sea 심해역 파일롯 양광시험을 위한 수력펌프설계

31 October 2019. pp. 529-534

PDF XML

Abstract

The deep-sea hydraulic pump was designed for the pilot lifting test(PLT) after the determination of lifting distance and flow quantity. We deduced four design factors for the optimization of the hydraulic design. Four design factors are inlet/outlet angles of one blade of an impeller and inlet/outlet angles of one blade of a guided vane. Each angle has three variation of magnitude to be called three levels. For the respective factors, three levels of factors were deduced on the basis of CFD. The optimum values of four angles were determined by using design of experiments and parametric study.

Keywords

Deep-sea Manganese nodules

Hydraulic design

Pilot Lifting Test

CFD

design of experiments

본 연구에서는 PLT를 위한 심해역 양광펌프의 설계를 위해 양정과 유량을 결정한 후 수력설계를 수행하였다. 수력설계의 최적화를 위하여 4개의 설계인자를 추출하였다. 4개의 설계인자는 임펠라의 입구각도, 출구각도 그리고 가이드 베인의 입구각도, 출구각도이다. 각 각도는 3수준이라 불리우는 3개의 각도크기 변화가 있다. 이렇게 추출된 설계인자를 바탕으로 각각의 인자에 대하여 3수준의 인자를 정한 후 CFD 해석을 바탕으로 최적의 인자를 도출하였다. 네 개의 각도에 대한 최적값은 실험계획법과 파라메트릭 연구를 통하여 결정하였다.

키워드

심해저 망간단괴

수력설계

파일롯 양광시험

전산유체역학

실험계획법

References

Chung, J.S., 1994. Advanced in deep-ocean mining systems research. Proc. of 4th International Offshore and Polar Engineering Conference, ISOPE, Osaka, Japan, p.18-31.

Lee, J.W., Choi, Y.D., Lee, Y.H., Yoon, C.H., and Park, J.M., 2010. Internal flow analysis on a mixed flow pump for developing marine mineral resources. J. of Fluid Machinery, 13(5), 11-16.

10.5293/KFMA.2010.13.5.011

Park, J.M., Yoon, C.H., and Kang, J.S., 2009. Numerical prediction of a lifting pump for deep-sea mining. Proc. of The 8th ISOPE Ocean Mining Symposium, ISOPE, Chennai, India, p.229-232.

Park, J.M., Yoon, C.H., Park, Y.C., Kim, Y.J., Lee, D.K. and Kwon, S.K., 2007. Three dimensional solid-liquid flow analysis for design of two-stage lifting pump. Proc. of The 7th ISOPE Ocean Mining Symposium, ISPOE, Lisbon, Portugal, p.171-176.

Park, S.M., 1986. Modern Design of Experiments, Dayoungsa.

Yoon, C.H., Kang, J.S., Park, J.M., Park, Y.C., Kim, Y.J., and Kwon, S.K., 2009. Flow analysis by CFD model of lifting system for shallow sea test. Proc. of The 8th ISOPE Ocean Mining Symposium, ISOPE, Chennai, India, p.225- 228.

Yoon, C.H., Park, J.M., Kang, J.C., Kim, Y.J., Park, Y.C., Park, S.G., Kim C.R., Kang, S.S., Kim, S.B., Kim, W.T., Kwon, S.K., and Ahn, B.S., 2010. Integrated mining test in the shallow sea for the development of deep-sea mineral resources in korea. J. the Korean Society of Mineral and Energy Resources Engineers, 47(4), 557-565.

Yoon, C.H., Park, Y.C., Lee, D.K., Kwon, K.S., and Kwon, S.K., 2003. Hydraulic pumping test system of KIGAM for deep-sea manganese nodules. The 33^rd Annual Conference of the Underwater Mining Institute, KORDI, Jeju, Korea, p.131-135.

Information

Publisher :The Korean Society of Mineral and Energy Resources Engineers
Publisher(Ko) :한국자원공학회
Journal Title :Journal of the Korean Society of Mineral and Energy Resources Engineers
Journal Title(Ko) :한국자원공학회지
Volume : 56
No :5
Pages :529-534
Received Date : 2019-09-03
Revised Date : 2019-10-16
Accepted Date : 2019-10-25
DOI :https://doi.org/10.32390/ksmer.2019.56.5.529

Journal of the Korean Society of Mineral and Energy Resources Engineers ISSN:2288-0291(Print) 2288-2790(Online) 한국자원공학회지

All Issue