Research Paper
Abstract
References
Sorry, not available.
Click the PDF button.
Information
The objectives of this study are to develop asbestos removal equipment using friability of soils, and to evaluate its in-situ application. Removal equipment for friable asbestos in soils using wind blowing system was invented and two representative sites with over 1% and less 1% of asbestos in soils were examined for field application. The total removal amount of air asbestos scattered from high level of asbestos in soil was 117.9 f/cc at 30 times trials and 50% of the friable asbestos was removed at 6 times. Eventually, asbestos level in the soil was decreased up to 1%. In addition to low concentration of asbestos in soil, the total removal amount of air asbestos scattered from soil was 24.4 f/cc at 30 times and 50% of the friable asbestos was removed at 8 times. Consequently 50% of friable asbestos in soils can be removed by 5~10 times trials using the equipment with 0.5m/s at 10m2 contaminated site. Because the maximum removal amount of asbestos in fibrous particles was 0.4 f/cc, a scale-up for the equipment is needed to enhance the removal ability of friable asbestos in soils.
본 연구의 목적은 국내에 적용 가능한 토양 중 섬유상 물질을 제거하는 장치를 개발하여, 현장 적용성을 평가하는 것이다. 이를 위하여 인위적으로 토양 중 석면을 비산하여 포집하는 석면정화장치를 개발하였으며, 토양 중 석면의 함유량 1% 이상과 1% 이하의 오염토양을 대상으로 현장 적용성을 시험하였다. 고농도(1% 이상) 토양을 비산시켜 대기시료를 포집ㆍ분석한 결과, 총 30회 정화를 수행하였을 경우 117.9 f/cc의 섬유상물질을 제거하였으며, 6회 수행한 경우 50% 정도의 섬유상 물질이 포집되었다. 그 결과 토양시료의 정화 전과 후의 함유량은 최대 1.00%까지 저감되었다. 한편, 저농도(1% 이하) 토양의 대기시료 분석 결과, 총 30회 정화 시 24.4 f/cc의 섬유상 물질이 제거되었으며, 고농도 토양과 유사하게 8회에서 50%를 초과하는 포집 함유량을 보였다. 결과적으로 10 m2의 오염부지인 경우 이동속도를 0.5 m/s로 5~10회 운영하면 50% 이상을 제거할 수 있었다. 다만 농도에 관계없이 30회 수행했을 경우 최대 처리 용량이 0.4 f/cc로 측정되어 용량 증대를 위하여 규격을 확대한다면 넓은 지역에 대한 석면오염토양 복원사업에 활용될 수 있을 것으로 사료된다.
Click the PDF button.
- Publisher :The Korean Society of Mineral and Energy Resources Engineers
- Publisher(Ko) :한국자원공학회
- Journal Title :Journal of the Korean Society for Geosystem Engineering
- Journal Title(Ko) :한국지구시스템공학회지
- Volume : 49
- No :6
- Pages :815-821
- DOI :https://doi.org/10.12972/ksmer.2012.49.6.815


Journal of the Korean Society of Mineral and Energy Resources Engineers







