Application of 3D Printing Technology in Seismic Physical Modeling

Daechul Kim; Sungryul Shin; Wookeen Chung; Changsoo Shin; Kyoungmin Lim

doi:10.32390/ksmer.2019.56.3.260

All Issue

2019 Vol.56, Issue 3 Preview Page Next Page

Technical Report

Application of 3D Printing Technology in Seismic Physical Modeling 탄성파 축소모형 실험에서의 3D 프린팅 기술 활용

30 June 2019. pp. 260-269

PDF XML

Abstract

The application of 3D printing technology in seismic physical modeling was investigated and the related domestic research was conducted. First, seven types of additive manufacturing methods were evaluated. In this report, to confirm the application of 3D printing technology, related studies in domestic and international journals of geophysics were searched and a comprehensive analysis was conducted according to year and the additive manufacturing type. The analysis showed that studies on 3D printing technology have been dominantly conducted since the 2010s, which corresponds to the time when 3D printers were commercialized. Moreover, 87% of the studies used the material extrusion additive manufacturing method, and the research was conducted in specific universities. This research can be used as basic data for application of 3D printing technology in geophysics.

Keywords

Seismic physical modeling

3D printing

탄성파 축소모형 실험에서의 3D 프린팅 기술 활용에 관하여 파악하였으며, 국내에서 수행되고 있는 연구를 서술하였다. 먼저 3D 프린팅 기술을 적층 방식에 따라 7가지로 분류하여 설명하였다. 3D 프린팅 기술 활용을 파악하기 위하여 물리탐사 분야의 국내외 학술지에서 관련 연구를 검색하였고 관련 연구를 연도 및 3D 프린팅 적층 방식에 따라 종합적인 분석을 수행하였다. 분석 결과, 2010년대부터 연구가 수행되어 왔으며, 이는 3D 프린터의 상용화 시점과 비슷한 것을 확인할 수 있었다. 또한 논문의 87%가 material extrusion 적층 방식을 활용하였으며, 수행된 연구들은 특정 대학에 집중되어 수행되었다. 본 연구 내용을 활용한다면 탄성파 축소모형 실험 분야에서 3D 프린팅 기술 활용에 대한 기초자료로 사용될 수 있을 것으로 생각된다.

키워드

탄성파 축소모형 실험

3D 프린팅

References

ASTM International, 2015. ISO/ASTM 52900:2015 Additive manufacturing - General principles - terminology, ASTM F2792, West Conshohocken, Pennsylvania, USA.

Atlantic Council, 2011. Could 3D Printing Change the World? Technologies, Potential, and Implications of Additive Manufacturing, Strategic Foresight Report, Washington D.C., USA.

Chohan, J.S., Singh, R., Boparai, K.S., Penna, R., and Fraternali, F., 2017. Dimensional accuracy analysis of coupled fused deposition modeling and vapour smoothing operations for biomedical applications. Composites Part B: Engineering, 117, 138-149.

10.1016/j.compositesb.2017.02.045

Crump, S.S., 1989. US, Patent No. 5,121,329

Dande, S., Stewart, R.R., and Dyaur, N., 2018. The effect of fluids and their viscosity on the elastic-wave velocity and anisotropy of 3D-printed VTI rock models. 2018 SEG International Exposition and 88th Annual Meeting, SEG, Anaheim, California, USA, p.347-350.

10.1190/segam2018-2998577.1

Dande, S., Stewart, R.R., Dyaur, N., and Franceschi, J.B., 2017. The effect of proppant-filled fractures on the elastic properties of 3D-Printed rock models. 2017 SEG International Exposition and 87th Annual Meeting, SEG, Houston, Texas, USA, p.5767-5771.

10.1190/segam2017-17789169.1

Espalin, D., Muse, D.W., MacDonald, E., and Wicker, R.B., 2014. 3D printing multifunctionality: structures with electronics, The International J. Advanced Manufacturing Technology, 72(5-8), 963-978.

10.1007/s00170-014-5717-7

Gibson, I., Rosen, D., and Stucker, B., 2015. Additive Manufacturing Technologies: 3D Printing, Rapid Prototyping, and Direct Digital Manufacturing (2nd Ed.), Berlin, Germany, p.63-268.

Han, J.Y., 2014. Emergence of 3D printer and intellectual property. Copyright Quarterly, 27(2), 145-170.

Huang, L., Dyaur, N., and Stewart, R.R., 2015. Elastic properties of 3D-Printed physical models: fluid substitution observations in cracked media. 2015 SEG New Orleans Annual Meeting, SEG, New Orleans, Louisiana, USA, p.3100-3104.

10.1190/segam2015-5915204.126677718

Huang, L., Stewart, R.R., Dyaur, N., and Franceschi, J.B., 2016. 3D-printed rock models: elastic properties and the effects of penny-shaped inclusions with fluid substitution. GEOPHYSICS, 81(6), D669-D677.

10.1190/geo2015-0655.1

Hull, C.W., 1986. US, Patent No. 4,575,330

Joshi, S.C. and Sheikh, A.A., 2015. 3D printing in aerospace and its long-term sustainability. Virtual and Physical Prototyping, 10(4), 175-185.

10.1080/17452759.2015.1111519

Khoshnevis, B., 2004. Automated construction by contour crafting-related robotics and information technologies. Automation in Construction, 13(1), 5-19.

10.1016/j.autcon.2003.08.012

Kim. D.C., Lee. D.W., Shin S.R., and Chung. W.K., 2017. A Study on 3D printer application for seismic physical modeling. 2017 108th Spring Conference of the Korean Society of Mineral and Energy Resources Engineers, KSMER, Yeosu, Korea, 148p.

Kwak, K.H. and Park, S.W., 2013. Trend analysis of global 3D printer industry. J. of the KSME, 53(10), 58-64.

Lee, B.J., 2015. Patent trend analysis in 3D printing, Prospectives of Industrial Chemistry, 18(1), 45-49.

Liaw, C.Y. and Guvendiren, M., 2017. Current and emerging applications of 3D printing in medicine. Biofabrication, 9(2), p.024102.

10.1088/1758-5090/aa727928589921

Ngo, T.D., Kashani, A., Imbalzano, G., Nguyen, K.T.Q., and Hui, D., 2018. Additive manufacturing (3D printing): A review of materials, methods, applications and challenges. Composites Part B: Engineering, 143, 172-196.

10.1016/j.compositesb.2018.02.012

Paek, S.H., 2015. Introduction of 3D printing technology & applications. Prospectives of Industrial Chemistry, 18(1), 2-10.

Park, H.W., 2014. 3D printing technology trend and application overview. J. of the KSME, 54(4), 32-35.

Redwood, B., Schoffer, F., and Garret, B., 2017. The 3D Printing Handbook Technologies, design and applications, 3D HUBS, Amsterdam, Netherlands.

Schwab, C., 2016. The Fourth Industrial Revolution, Newpresent, Seoul, Korea, p.234-243.

Shin, Y.M., 2015. Types and applications of 3D printers. Polymer Science and Technology, 26(5), 404-409.

Sun, J., Zhou, W., Huang, D., Fuh, J.Y.H., and Hong, G.S., 2015. An overview of 3D printing technologies for food fabrication. Food and Bioprocess Technology, 8(8), 1605-1615.

10.1007/s11947-015-1528-6

Tay, Y.W.D., Panda, B., Paul, S.C., Mohamed, N.A.N., Tan, M.C., and Leong, K.F., 2017. 3D printing trends in building and construction industry: a review. Virtual and Physical Prototypig, 12(3), 261-276.

10.1080/17452759.2017.1326724

Vanderploeg, A., Lee, S.E., and Mamp, M., 2017. The application of 3D printing technology in the fashion industry. International J. Fashion Design, Technology and Education, 10(2), 170-179.

10.1080/17543266.2016.1223355

Vanmaele, L., Daems, E., Voeght, F.D., and Thillo, E.V., 2007. US, Patent No. 8,142,860

Wang, J., Stewart, R.R., and Dyaur, N.I., 2018. Seismic response analysis of a 3D-printed dual-porosity physical model: marine case. 2018 SEG International Exposition and 88th Annual Meeting, SEG, Anaheim, California, USA, p.301-305.

10.1190/segam2018-2997200.1

Wang, X., Man Jiang, M., Zhou, Z., Gou, J., and Huic, D., 2017. 3D printing of polymer matrix composites: a review and prospective. Composites Part B: Engineering, 110, 442-458.

10.1016/j.compositesb.2016.11.034

Zerhouni, O., Tarantino, M.G., and Danas, K., 2018. Influence of the internal geometry on the elastic properties of materials using 3D-printing of computer-generated random microstructures. 2018 SEG International Exposition and 88th Annual Meeting, SEG, Anaheim, California, USA, p.3713-3718.

10.1190/segam2018-2998182.1

Information

Publisher :The Korean Society of Mineral and Energy Resources Engineers
Publisher(Ko) :한국자원공학회
Journal Title :Journal of the Korean Society of Mineral and Energy Resources Engineers
Journal Title(Ko) :한국자원공학회지
Volume : 56
No :3
Pages :260-269
Received Date : 2019-05-03
Revised Date : 2019-06-20
Accepted Date : 2019-06-21
DOI :https://doi.org/10.32390/ksmer.2019.56.3.260

Journal of the Korean Society of Mineral and Energy Resources Engineers ISSN:2288-0291(Print) 2288-2790(Online) 한국자원공학회지

All Issue