Current Technologies and Field Cases of Onshore Deep Oil Well Drilling

doi:None

All Issue

2010 Vol.47, Issue 5 Preview Page

Current Technologies and Field Cases of Onshore Deep Oil Well Drilling 육상 석유 심부시추 기술 동향 및 적용사례: 임종세, 강판상, 김현태
Jong-Se Lim, Pan-Sang Kang and Hyun-Tae Kim

31 October 2010. pp. 809-821

PDF

Abstract

Unlike the shallow drilling, deep oil well drilling may be operated in the high formation pressure and high temperature conditions. In these drilling environments, kick, differential sticking, damage of drilling equipments or lost circulation may occur more frequently. Drilling cost and non-productive time could be increased accordingly. More improved equipments and technologies are required to overcome these difficulties and improve productivity while drilling deep formation. The goals of this study are to investigate current technologies for deep oil well drilling such as underbalanced drilling, managed pressure drilling, casing drilling, expandable tubular, mud hammers, mud-pulse drilling, and their applications at Tizon Field in Mexico and El Furrial Field in Venezuela.

Keywords

Deep oil well drilling

Underbalanced drilling

Managed pressure drilling

High temperature

High pressure

석유 심부시추는 천부시추와는 달리 시추 깊이가 깊어질수록 온도 및 압력의 증가로 작업이 어려운 환경에서 시추가 진행된다. 이로 인해 킥, 편향점착, 장비손상, 이수손실 등이 더 자주 발생할 가능성이 높아지므로 시추비용이 증가하고 작업중단기간이 매우 길어질 수 있다. 이러한 시추 환경을 극복하고 생산성을 향상시키기 위해서는 보다 향상된 장비와 기술이 필요하다. 이 연구에서는 석유 심부시추 기술 중 공내감압 시추법 및 압력제어 시추법과 적용사례인 멕시코의 Tizon Field, 베네수엘라의 El Furrial Field에 대해 알아보고자 한다. 또한 최신 석유 심부시추 기술인 케이싱 시추법, 확장성 파이프, Mud hammers, 이수 파동 시추법에 대해 소개하고자 한다.

키워드

석유 심부시추

공내감압 시추법

압력제어 시추법

고온

고압

References

이경북, 최종근, 2009, “시추깊이와 총비용의 시대에 따른 변화 연구,” 한국지구시스템공학회지, 제46권 2호, pp. 182-189.
Bern, P.A., Armagost, W.K., and Bansal, R.K., 2004, “Managed Pressure Drilling with the ECD Reduction Tool,” SPE paper 89737 presented at the SPE Annual Technical Conference and Exhibition held in Houston, Texas, U.S.A., September 26-29.
Buntoro, A., 2008, “Casing Drilling Technology as the Alternative of Drilling Efficiency,” IADC/SPE paper 115283 presented at the IADC/SPE Asia Pacific Drilling Conference and Exhibition held in Jakarta, Indonesia, August 25-27.
E&P, 2010. 6. 28., http://www.epmag.com/. Gelfgat, Y.A, Gelfat, M.Y., and Lopatin, Y.S., 2003, Advanced Drilling Solutions : Volume II Lessons from the FSU, Pennwell, Tulsa, Oklahoma, U.S.A. pp. 155-160.
Lake, L.W. Mitchell, R.F., Nas, S., and Long, R.C., 2006, Petroleum Engineering Handbook : Volume II Drilling Engineering, SPE, Texas, U.S.A., pp. 519-582.
Mclennan, J., Carden, R.S., Curry, D., Stone, C.R., and Wyman, R.E., 1997, “Underbalanced Drilling Manual,” Gas Research Institute.
Morrison, W., Baggal, Z., Baxendale, B., and Boudreaux, R., 2005, “Optimizing Wellbore Design Using Solid Expandable Tubular and Bi-Center Bit Technologies,” SPE paper 92886 presented at the 14th SPE Middle East Oil&Gas Show and Conference held in Bahrain International Exhibition Centre, Bahrain, March 12-15.
Novatek, 2010. 6. 28., http://www.novatek.com/.
Ostroot, K., Shayegi, S., Lewis, D., and Lovorn, R., 2007, “Comparison and Advantages of Underbalanced and Managed-Pressure Drilling Techniques : When Should Each Be Applied?,” OTC paper 18561 presented at the Offshore Technology Conference held in Houston, Texas, U.S.A., April 30-May 3.
Rehm, B., Schubert, J., Haghshenas, A., Paknejad, A.S., and Hughes, J., 2008, Managed Pressure Drilling, Gulf of Publishing Company, Houston, Texas, U.S.A. pp. 1-259.
Shaughnessy, J.M., Romo, L.A., and Soza, R.L., 2003, “Problems of Ultra-Deep High-Temperature, High-Pressure Drilling,” SPE paper 84555 presented at the SPE Annual Technical conference and Exhibition held in Denver, Colorado, U.S.A., October 5-8.
OGJ, 2010. 6. 28., http://www.ogj.com/index/article-display/22937/articles/oil-gas-journal/volume-97/issue-20/in-this-issue/
general-interest/drilling-with-casing-promises-major-benefits.html.
Tellez, C.P., Duno, H., Lupo, C., and Medina., L.A., 2009, “Successful Application of MPD Technique in a HP/HT Well Focused on Performance Drilling in Southern Mexico Deep Fractured Carbonates Reservoirs,” IADC/SPE paper 122200 presented at the IADC/SPE Managed pressure drilling and Underbalanced Operations Conference and Exhibition held in San Antonio, Texas, U.S.A., February 12-13.
Tempress, 2010. 6. 28., http://www.tempress.dk/. Villarroel N., Almanza, E.A., Scott, M., Vera, I., Fernandez, D., Salazar, A., and Gomez, L., 1999, “First Underbalanced Coiled-Tubing-Conveyed Perforating Operation Performed in an HP/HT Highly Deviated Well in East Venezuela,” SPE 54509 presented at the SPE/ICoTA Coiled Tubing Roundtable held in Houston, Texas, U.S.A., May 25-26.
Weatherford, 2010. 6. 28., http://www.weatherford.com/.

Information

Publisher :The Korean Society of Mineral and Energy Resources Engineers
Publisher(Ko) :한국자원공학회
Journal Title :Journal of the Korean Society for Geosystem Engineering
Journal Title(Ko) :한국지구시스템공학회지
Volume : 47
No :5
Pages :809-821

[1] 이경북, 최종근, 2009, “시추깊이와 총비용의 시대에 따른 변화 연구,” 한국지구시스템공학회지, 제46권 2호, pp. 182-189.

[2] Bern, P.A., Armagost, W.K., and Bansal, R.K., 2004, “Managed Pressure Drilling with the ECD Reduction Tool,” SPE paper 89737 presented at the SPE Annual Technical Conference and Exhibition held in Houston, Texas, U.S.A., September 26-29.

[3] Buntoro, A., 2008, “Casing Drilling Technology as the Alternative of Drilling Efficiency,” IADC/SPE paper 115283 presented at the IADC/SPE Asia Pacific Drilling Conference and Exhibition held in Jakarta, Indonesia, August 25-27.

[4] E&P, 2010. 6. 28., http://www.epmag.com/. Gelfgat, Y.A, Gelfat, M.Y., and Lopatin, Y.S., 2003, Advanced Drilling Solutions : Volume II Lessons from the FSU, Pennwell, Tulsa, Oklahoma, U.S.A. pp. 155-160.

[5] Lake, L.W. Mitchell, R.F., Nas, S., and Long, R.C., 2006, Petroleum Engineering Handbook : Volume II Drilling Engineering, SPE, Texas, U.S.A., pp. 519-582.

[6] Mclennan, J., Carden, R.S., Curry, D., Stone, C.R., and Wyman, R.E., 1997, “Underbalanced Drilling Manual,” Gas Research Institute.

[7] Morrison, W., Baggal, Z., Baxendale, B., and Boudreaux, R., 2005, “Optimizing Wellbore Design Using Solid Expandable Tubular and Bi-Center Bit Technologies,” SPE paper 92886 presented at the 14th SPE Middle East Oil&Gas Show and Conference held in Bahrain International Exhibition Centre, Bahrain, March 12-15.

[8] Novatek, 2010. 6. 28., http://www.novatek.com/.

[9] Ostroot, K., Shayegi, S., Lewis, D., and Lovorn, R., 2007, “Comparison and Advantages of Underbalanced and Managed-Pressure Drilling Techniques : When Should Each Be Applied?,” OTC paper 18561 presented at the Offshore Technology Conference held in Houston, Texas, U.S.A., April 30-May 3.

[10] Rehm, B., Schubert, J., Haghshenas, A., Paknejad, A.S., and Hughes, J., 2008, Managed Pressure Drilling, Gulf of Publishing Company, Houston, Texas, U.S.A. pp. 1-259.

[11] Shaughnessy, J.M., Romo, L.A., and Soza, R.L., 2003, “Problems of Ultra-Deep High-Temperature, High-Pressure Drilling,” SPE paper 84555 presented at the SPE Annual Technical conference and Exhibition held in Denver, Colorado, U.S.A., October 5-8.

[12] OGJ, 2010. 6. 28., http://www.ogj.com/index/article-display/22937/articles/oil-gas-journal/volume-97/issue-20/in-this-issue/

[13] general-interest/drilling-with-casing-promises-major-benefits.html.

[14] Tellez, C.P., Duno, H., Lupo, C., and Medina., L.A., 2009, “Successful Application of MPD Technique in a HP/HT Well Focused on Performance Drilling in Southern Mexico Deep Fractured Carbonates Reservoirs,” IADC/SPE paper 122200 presented at the IADC/SPE Managed pressure drilling and Underbalanced Operations Conference and Exhibition held in San Antonio, Texas, U.S.A., February 12-13.

[15] Tempress, 2010. 6. 28., http://www.tempress.dk/. Villarroel N., Almanza, E.A., Scott, M., Vera, I., Fernandez, D., Salazar, A., and Gomez, L., 1999, “First Underbalanced Coiled-Tubing-Conveyed Perforating Operation Performed in an HP/HT Highly Deviated Well in East Venezuela,” SPE 54509 presented at the SPE/ICoTA Coiled Tubing Roundtable held in Houston, Texas, U.S.A., May 25-26.

[16] Weatherford, 2010. 6. 28., http://www.weatherford.com/.

Journal of the Korean Society of Mineral and Energy Resources Engineers ISSN:2288-0291(Print) 2288-2790(Online) 한국자원공학회지

All Issue