Development of Pre-Concentration Technique of Ul-jin Cassiterite Ore by Jig Separation

doi:10.12972/ksmer.2015.52.3.302

All Issue

2015 Vol.52, Issue 3 Preview Page Next Page

Research Paper

Development of Pre-Concentration Technique of Ul-jin Cassiterite Ore by Jig Separation 지그선별에 의한 울진 주석광의 전처리 기술개발: 김수강 · 백상호 · 김병곤 · 고상모 · 전호석
Su-Gang Kim, Sang-Ho Baek, Byoung-Gon Kim, Sang-Mo Koh and Ho-Seok Jeon

30 June 2015. pp. 302-308

PDF

Abstract

In general, low-grade cassiterite ore for various reasons processed pre-concentration to remove coarsegangue prior to the main cassiterite beneficiation process. Even though there are several gravity separators suchas jig separator, spiral, and knelson concentrator for pre-concentrating, the jig separator in this study was adoptedfor pre-concentration of the low grade cassiterite ore. The feed sample was prepared to 0.5~5 mm in size bycrushing and grinding. Experiment was carried out under the kind of balls steel ball, height of artificial bed 6cm, water flow rate 1,000 ml/min. and no additional scavenging. As a result, the pre-concentrate of Sn was reachedabout 14.90% with 94.95% recovery by jig separator.

Keywords

Cassiterite

Pre-Concentrate

Gravity Separator

Jig Separator

일반적으로 저품위 주석은 선별효율 향상, 처리량 증대, 처리비용 저감 등의 이유로, 최종 선별처리에앞서 조립자에서 많은 양의 맥석을 제거한 전처리 공정을 거친다. 저품위 주석의 경우 조선정광을 얻기 위해jig separator, spiral, knelson concentrator 등의 비중선별기를 사용하며, 본 연구에서는 jig separator를 이용한연구를 수행하였다. 시료는 파‧분쇄 과정을 거쳐 0.5∼5 mm로 준비하였으며, 볼의 종류 철 볼, 인공 베드의높이 6 cm, 급수량 1,000 ml/min., 추가적인 청소부선 없이 실험을 수행하였다. 실험결과, 최적실험 조건에서주석의 품위와 회수율이 각각 14.90%와 94.95%인 정광을 얻었다.

키워드

주석

조선정광

비중선별기

지그선별기

References

Bulatovic, S.M., 2007, Handbook of flotation reagents, 1th Ed., Vol. 2, Elsevier Science & Technology Books, Amsterdam, Netherlands, pp. 87-109.
Falcon, L.M., 1982, “The gravity recovery of cassiterite,” Journal of the South African Institute of Mining and Metallurgy, pp. 112-117.
Jeon, H.S., Angadi, S.I. and Baek, S.H., 2011, “Efficiency evaluation of gravity jigs treating cassiterite ore,” Recent Advances in Processing of Non-Ferrous and Industrial Minerals, MPT, Udaipur, India, October 20-22, pp. 3582- 3588.
Jeon, H.S., Angadi, S.I. and Baek, S.H., 2012, “Selection of gravity concentrators for the beneficiation of cassiterite ore - A Holistic Approach,” Conference Proceedings, IMPC, New Delhi, India, September 24-28, pp. 2090-2094.
Korea Mineral Resources Information Service, 2014.07.28, www.kores.net.
Wills, B.A. and Napier-Munn, T.J., 2006, Mineral Processing Technology, 7th Ed., Elsevier Science & Technology Books, Amsterdam, Netherlands, pp. 227-229.
Youssef, M.A., Abd El-Rahman, M.K., Helal, N.H., El- Rabiei, M.M. and Elsaidy, S.R., 2009, “Optimization of shaking table and dry magnetic separation on recovery of Egyptian placer cassiterite using experimental design technique,” The Journal of Ore Dressing, Vol. 11, No. 22, pp. 1-9.

Information

Publisher :The Korean Society of Mineral and Energy Resources Engineers
Publisher(Ko) :한국자원공학회
Journal Title :Journal of the Korean Society of Mineral and Energy Resources Engineers
Journal Title(Ko) :한국자원공학회지
Volume : 52
No :3
Pages :302-308
DOI :https://doi.org/10.12972/ksmer.2015.52.3.302

[1] Bulatovic, S.M., 2007, Handbook of flotation reagents, 1th Ed., Vol. 2, Elsevier Science & Technology Books, Amsterdam, Netherlands, pp. 87-109.

[2] Falcon, L.M., 1982, “The gravity recovery of cassiterite,” Journal of the South African Institute of Mining and Metallurgy, pp. 112-117.

[3] Jeon, H.S., Angadi, S.I. and Baek, S.H., 2011, “Efficiency evaluation of gravity jigs treating cassiterite ore,” Recent Advances in Processing of Non-Ferrous and Industrial Minerals, MPT, Udaipur, India, October 20-22, pp. 3582- 3588.

[4] Jeon, H.S., Angadi, S.I. and Baek, S.H., 2012, “Selection of gravity concentrators for the beneficiation of cassiterite ore - A Holistic Approach,” Conference Proceedings, IMPC, New Delhi, India, September 24-28, pp. 2090-2094.

[5] Korea Mineral Resources Information Service, 2014.07.28, www.kores.net.

[6] Wills, B.A. and Napier-Munn, T.J., 2006, Mineral Processing Technology, 7th Ed., Elsevier Science & Technology Books, Amsterdam, Netherlands, pp. 227-229.

[7] Youssef, M.A., Abd El-Rahman, M.K., Helal, N.H., El- Rabiei, M.M. and Elsaidy, S.R., 2009, “Optimization of shaking table and dry magnetic separation on recovery of Egyptian placer cassiterite using experimental design technique,” The Journal of Ore Dressing, Vol. 11, No. 22, pp. 1-9.

Journal of the Korean Society of Mineral and Energy Resources Engineers ISSN:2288-0291(Print) 2288-2790(Online) 한국자원공학회지

All Issue