All Issue

2010 Vol.47, Issue 6 Preview Page
31 December 2010. pp. 844-851
Abstract
In order to compare flotation efficiency with the change of impeller speed and the input amount of compressed air, experiments were conducted on a domestic gold ore with the same kind and equal amount of reagent in the batch flotation machine. In the case of air flowing by only Impeller’s rotation without additional injection of compressed air, it was difficult to form and keep appropriate bubble layer for separation in the impeller speed of 1,300 of lower. At the speed of 1,400 rpm, stable bubble layer was obtained and the grade and the recovery of gold reached 58.92 ppm and 75.09% recovery respectively. For the use of air inlet, instead of air injection by impeller, in various the rate of air inlet and impeller speed, the huge amount of compressed air was required in low rpm condition, while in high rpm condition the less of amount air was enough for high flotation efficiency. Moreover, it was confirmed that collector K.A.X (65 ㎖/ton), frother AF 65 (0.5 ℓ/ton), Impeller speed of 1,500 rpm and the amount of compressed air 4 ℓ/min were the optimum condition and the maximum increased to 91.93 ppm (Au grade) and 78.29% (Au recovery) in this study.
일반부선기에서 임펠러 회전속도와 압축공기 주입량에 따른 부선효율을 비교하기위해, 국내에서 생산되는 금광을 대상으로 시약의 종류 및 첨가량을 동일하게 한 후 실험을 실시하였다. 별도의 압축공기를 주입하지 않고 임펠러의 회전에 의한 공기유입상태에서 임펠러의 회전속도만을 변화시켜 실험한 결과, 1,300 rpm 이하에서는 임펠러의 회전에 의해 유입되는 공기량이 부족하여 선별에 적합한 기포층의 형성 및 유지가 어려웠다. 안정적인 기포층이 유지되는 1,400 rpm에서 58.92 ppm의 Au를 75.09% 회수율과 함께 얻을 수 있었다. 또한, 공기주입량과 임펠러속도를 변화시키면서 공기유입방식 대신 공기 유입구에 압축공기를 주입하여 실험한 결과 낮은 회전속도에서는 많은 양의 압축공기가 필요하나, 높은 회전속도에서는 압축공기량이 적을수록 선별효율이 향상됨을 확인하였다. 한편, 본 연구에서는 포수제 K.A.X (65 ㎖/ton), 기포제 AF 65 (0.5 ℓ/ton), 임펠러 속도 1,500 rpm, 압축공기 주입량 4 ℓ/min이 최적조건임을 확인하였고, 최대 91.13 ppm의 Au를 78.29% 회수율과 함께 얻을 수 있었다.
References
  1. 미국 경제뉴스 전문방송, Published: Friday, 18 Jun 2010, http://www.cnbc.com, Three Reasons for Record Gold Prices.
  2. 정문영, 유승우, 박홍규, 2009, “연탄재 부유선별에서 고정 탄소의 산화가 유상포수제 첨가량에 미치는 영향,” 한국지구시스템공학회지, 제46권 5호, pp. 582-584.
  3. 한국자원정보서비스, 2010. 8. 16, http://www.kores.net/
  4. 한오형 등 4명, 2009, “금・은 부선 광미로부터 유가금속 회수를 위한 선별기술 개발,” 제 93회 추계학술발표논문집, 한국지구시스템공학회, 강원랜드, 9월 23일, p. 281.
  5. Bulatovic, S. M., 2007, Handbook of Flotation Reagents, 1st Ed., Vol.1, Elsevier, Amsterdam, Netherlands, pp. 274-280.
  6. Deglon, D. A., 2005, “The effect of agitation on the flotation of platinum ores,” Minerals Engineering, Vol. 18, pp. 839-844.
  7. Gorain, B. K., Franzidis, J. P. and Manlapig, E. V., 1995, “Studies on impeller type, impeller speed and air flow rate in an industrial scale flotation cell - part 1. effect on bubble size distribution,” Minerals Engineering, Vol. 8, No. 6, pp. 615-635.
Information
  • Publisher :The Korean Society of Mineral and Energy Resources Engineers
  • Publisher(Ko) :한국자원공학회
  • Journal Title :Journal of the Korean Society for Geosystem Engineering
  • Journal Title(Ko) :한국지구시스템공학회지
  • Volume : 47
  • No :6
  • Pages :844-851